2020 Mako 184 CC FEATURES:
- Engine – Mercury 2B681389 EXPLT Command Thrust 115 hp Gas Outboard with Low Hours
- Trailer – EZ Loader TA96BS 18-21 4000 Pounds
- T-Top
- New Humminbird Helix 7 VHF Integrated with GPS Sending Unit
- Depth Finder
- Bilge Pump
- USCG Safety Equipment
- All Cushions in Excellent Condition
- Cover for Helm Seat and Helm Station
| Length | 18′ 4” |
| Beam | 8′ 2” |
| Bottom Width | 6′ 8” |
| Max. Recommended HP | 150 HP |
| Fuel Capacity | 53.5 gal. |
| Max. Person Capacity | 5 persons |
| Max. Person Weight | 965 lbs. |
| Max. Person, Motor & Gear Weight | 1727 lbs. |
| Interior Depth | 23” |
| Transom Height At Center Line | 25” |
| Deadrise | 18 degrees |
| Draft | 12” |
| Dry Weight | 2255 lbs. |
| Average Hull Weight | 1800 lbs. |
| Average Package Weight | 3055 lbs. |
| Package Height | 8′ 6” |
| Package Height W/T-Top Or Hardtop | 9′ 10” |
| Storage Length | 25′ 7” |
CERTIFICATION & SAFETY
- Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
- NMMA® certified
- Factory leak tested for hull, plumbing & fitting integrity
- Horn
- Flush-mounted Ritchie Navigation® Voyager compass
CONSOLE
- Binnacle-mounted motor control(s)
- NEW Mercury® SmartCraft® digital gauges
- Heavy-duty electrical switching system w/battery selector switch(es)
- Easy access to helm electronics, instruments & switches
- Forward-console seat w/21-gal. (79.49 L) baitwell
- Integrated full-width footrest
- Acrylic windscreen
- Marine-grade tinned wiring w/submersible connectors
- 2 console drink holders
- 12V DC outlet
TOP
- .25″ (6.35 mm) aluminum backing-plate reinforcement for T-top mounting
INTERIOR
- Anchor locker
- Foredeck dodger mounting boss
- Port & starboard forward seats w/64-qt. (60.57 L) insulated storage below w/gravity overboard drainage
- Low-profile stainless steel bow rails
- Deluxe flip-flop helm seat w/72-qt. (68.14 L) cooler
- Self-bailing cockpit
- 2 gunnel-mounted rod holders
- Port & starboard under-gunnel rod racks for 4 rods
- NEW aft port & starboard removable, folding jump seats
- Molded non-skid surfaces throughout
- Bilge access hatch
- NEW cockpit coaming bolsters
- Four 6″ (15.24 cm) polished marine-grade stainless steel cleats
EXTERIOR
- Legendary dry-riding MAKO® hull
- Aggressive deep V hull design
- Performance lifting strakes
- Factory-matched propeller
CONSTRUCTION & EXTERIOR
- Color: MAKO® Bone White gelcoat
- 100% composite construction
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6″ (15.24 cm) w/316 stainless steel fasteners
- 1-piece molded fiberglass stringer grid w/integrated transom knee supports
- Closed-cell foam-injected stringer grid for USCG-approved flotation
- Heavy-duty rub rail & insert
- Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
- Closed-molded hatch covers w/finished undersides & integrated gaskets
- Aluminum backing plates for cleats & chocks
- NEW swim platform w/3-step stainless steel ladder
ELECTRICAL, MECHANICAL & PLUMBING SYSTEM
- USCG-compliant navigation lights
- NEW interior courtesy lights
- Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
TRAILER
- Tandem-axle EZ Loader® aluminum trailer
- NMMA® certified trailer
- DOT approved
- Tandem-axle brakes
- 13″ (33.02 cm) radial tires w/galvanized V5 wheels & galvanized axles
- Oil bath hubs
- Leaf spring suspension
- Heavy-duty winch w/nylon strap & safety strap
- Stainless steel hardware
- Galvanized steel components
- LED lighting
- PVC loading guides
- Composite fenders
